[bert.megens]

Thank you; I am very happy with your help.

[bert.megens]

Michael, thank you for your response and advice. I cannot apply your suggestions immediately because I am only an amateur site builder and not very familiar with Filiopress, horsetheme and Jetpack tiled gallery. But I’ll definitely explore how I turn off the opton to show the featured image on the post and instead put a Jetpack tiled gallery block with a single image. See my site: https://bertmegens.nl

[bert.megens]

Dear people,

Thanks for your answer. As you can see on my website https://www.bertmegens.nl, my images are not all of the same format. On the home page I solved the problem by placing the image in a white square. However, when I click on the images, which takes me to that page, you will see that only part of the image is displayed there.
I regret that because I am otherwise very satisfied with theme horse. I hope you have a suggestion that will help me solve the problem. I am looking forward to your response.

Regards,
Bert Megens

[bert.megens]

Thank you for your response. But when I follow your instructions and I set the slider “page / single post featured imageheight” to maximum size, I can still see about 70% of the height. At both the top and bottom 15-16% of the image can no longer be seen. Is it possible to set somewhere that the entire image should be visible?

Bedankt voor je reactie. Maar als ik je instructies volg en ik de schuifregelaar “pagina / enkele post aanbevolen afbeeldinghoogte” op maximale grootte zet, kan ik nog steeds ongeveer 70% van de hoogte zien. Zowel aan de boven- als onderkant is 15-16% van het beeld niet meer te zien. Is het mogelijk om ergens in te stellen dat de hele afbeelding zichtbaar moet zijn?

[Author]

Posts